How to restart an android tv

If things aren’t working the way they should on your Android TV (set-top box or software installed on your TV), it may be time to restart. Often times, simply restarting the device can solve any problems you are having. Find out how to do it.

If you use electronics, you know that the general “power cycle” advice often works. This also applies to Android TV devices. Sometimes a simple restart can make a world of difference. That is very easy.

CONNECTED: How to customize the Android TV home screen

First, use the D-Pad on your remote control to select the “Gear” icon in the upper right corner of the TV&#821

The Settings menu opens. Some Android TVs have a “Quick Settings” section at the top that includes “Restart”. If you have the option, select it and you are done.

If you don’t have the Quick Settings section, there are a few additional steps. First, scroll down and select “Device Settings”.

Then click on “Info”.

You will now see the “Restart” option. Select this option to restart your Android TV.

The TV switches off briefly and you will see the startup animations when it is switched on again. That’s it!

If things aren’t acting like they should on your Android TV (set-top box or software installed on your television), it may be time for a restart. Simply restarting the device can often solve problems you’re having. Here’s how to do it.

If you use electronics, you know that the common advice of “turning it off and on again” often works. This applies to Android TV devices as well. Sometimes a simple restart can make a world of difference. It’s very easy to do.

RELATED: How to Customize the Android TV Home Screen

First, use the D-pad on your remote to select the “Gear” icon in the top-right corner of the television’s customizable Home screen.

The Settings menu will slide open. Some Android TV devices will have a “Quick Settings” section at the top that includes “Restart.” If you have the option, select it and you’re done.

If you don’t have the “Quick Settings” section, there are a few extra steps. First, scroll down and select “Device Preferences.”

Next, click “About.”

You’ll now see the “Restart” option. Select it to restart your Android TV.

The television will power off briefly and then you’ll see the bootup animations as it powers on again. That’s it!

• › How to Restart an Android TV
• › How to Open Microsoft Edge Using Command Prompt on Windows 10
• › How to Transfer Your Facebook Photos and Videos to Dropbox
• › How to Change the Icon of a Shortcut on Windows 10
• › NVIDIA’s RTX 3000 Series GPUs: Here’s What’s New

Doing a reset for Android devices is quite simple. It also happens to be a necessary part of owning such a device. Android TV Boxes are no exception, it’s important to learn how to do this in case problems arise. When this happens and you’ve already tried everything, just reset the device and start fresh.

Some boxes come with instructions on how to do a factory reset. Often though, people are unaware of how simple the process actually is. This is what we will discuss in this article. Anyone with a device running on an Android OS knows that occasional factory resets are necessary. These ensure that the device will keep on operating smoothly.

There is a reason why these devices start slowing down over time. This is because they get filled with excess files, lowering the performance. So, when you perform a reset, all the excess gets eliminated and your device runs better.

Usually, it will function as if it were new. Read on to learn different methods of performing a reset on your Android TV Box.

Perform a factory reset on your Android TV box

Performing a factory reset on your Android TV box is really simple. No matter what manufacturer made your box, the process is fairly similar. Here are some steps for you to follow:

• First off, go to the Settings menu. You can find this on the bottom part of the home screen. Find the cog icon and select it.
• From the Settings menu, find the Storage & Rest option then select it.
• Once you’ve done that, there are only 2 options to choose from. These are “Internal Storage” and “Factory Data Reset.” Select the second option.
• There may be a number of options here, depending on the TV box you have. Some options may be “Fast Reset,” “Full Reset,” “Cancel,” or other such choices. For a factory reset, choose the “Full Reset” option. If the menu doesn’t have this option, choose the one which you think is best.
• When you’ve made the selection, one prompt screen may appear. This will confirm if you’re sure that you want to perform the desired action. Verify the action to start the process.
• The whole process may take some time, depending on the storage capacity of your device. If your device has a big storage capacity, then it may even take up to a few hours. Fortunately, you don’t have to sit in front of the TV and watch the whole process. Keep it running and check on it once in a while.

As soon as your device finishes, then you can start using it again. Ideally, the TV box will perform a lot faster. Also, any problem you may have been experiencing should be gone already.

Perform a hard reset on your Android TV box

A hard reset is different from a factory reset. You can also do this on your Android TV Box when you think you need to. A hard reset can be very beneficial. When your box crashes, then this is the best way to start it up again. When you do this, you can also install a custom or updated firmware for your box.

Before doing the hard reset, prepare a toothpick. You can also prepare something similar, just make sure it’s non-conductive. Also, if your remote isn’t working because the system crashed, prepare a USB keyboard. Here are some steps to guide you:

• First off, turn off your box and unplug it from the power source.
• Once you’ve done that, take the toothpick and place it inside the AV port. You can find the port on the back of the box. Gently press the toothpick down to feel a tiny button.
• Gently press down further until you feel the button depress. You’ll know when you’ve successfully pressed the button because it will click softly.
• Keep holding the button down then connect your box and power it up. Don’t release the button yet.
• Keep the toothpick in place to hold the button down until the logo emerges. Then the logo will go off and when this happens, you can let go of the button.
• If your box goes into its start-up mode, you can proceed to the last step. If it doesn’t then it means another screen will appear. This will ask you how you’d like to boot the TV box.
• When a menu appears, find and select the “wipe data” or “factory reset” option. You can use your USB keyboard to navigate through the screen.
• Press the tab key on the keyboard and select “delete all user data.”
• Press the tab key again and wait for the process to finish.
• Once it’s finished, select “reboot device” and press the tab key.
• Allow a few minutes for the box to reboot. When the box has rebooted, install all of your apps again. You can also install Kodi along with all its add-ons.

It’s useful to make a lot of all your apps before performing a hard reset. In doing this, you know which apps and add-ons you can install. These are all system apps so you won’t really lose them. You just have to take time and effort to install them into the box again.

How to reset Kodi on your Android TV box

Now that you know 2 different ways of resetting your Android TV Box, let’s learn how to reset Kodi on your box. Knowing this is handy especially when you run into problems with Kodi.

Resetting Kodi is quick, all you need are a few minutes to complete the whole process. Keep in mind, though, that when you reset Kodi, you’ll be removing all the add-ons in the process. But doing this is essential to keep it running well.

• First off, make sure you’ve exited Kodi before starting the reset procedure.
• Go to the settings screen of the box and find the apps or applications button.
• Click on Kodi for a new screen with options.
• Click on the “Clear Data” button to start the process.
• When it’s done, close the screens, launch Kodi and start using it again.

Check our Favorite TV Boxes

Today’s televisions can be connected to the Internet to opt for a multitude of additional services thanks to applications. Netflix, HBO, YouTube … are some of the most requested, but there may come a time when television does not work as it should and for that reason we will tell you how you can restart an Android TV and get everything to work as before.

Procedure to restart an Android TV

Today’s televisions operate under an operating system and depending on each house it has its own interface. But there are some companies that choose to put an Android operating system on their screen or users who, to put the Internet, choose to put a TV Box that has an operating system from Mountain View. Whatever your option you should know that to restart your Android TV.

This procedure is not as difficult as you think, but it is far from being executed as you think. And we will not discover the wheel if we told you that it is done by turning off and on the television, something that can help but would not be entirely effective. As with all electronic devices, the restart and shutdown of this has different functions and the case of a smart TV is no less.

But let’s get to the point, and is that to restart your Android TV what you have to do is go to the Settings section that can be represented by a gear or by three vertical points. If you have shortcuts you may have the opportunity to restart the screen with a simple press because it appears in the menu, but you may have other options.

This page includes affiliate links where TROYPOINT may receive a commission at no extra cost to you. Many times, you will receive a discount due to the special arrangements made for our visitors. I will never promote something that I personally don’t use or recommend. Purchasing through my links directly supports TROYPOINT which keeps the content and tools coming. Thank you!

This step-by-step guide will show you How to Reset Android TV Box.

Resetting your Android TV Box will return the device to the same state it was in when you first purchased it.

When you do this, it will erase all of the applications that you have installed. You can think of this as a fresh start.

Don’t worry, you can always use my free TROYPOINT App with the Rapid App Installer to reinstall your favorite streaming apps in a matter of minutes.

Many Android TV Boxes come with limited storage and once you install a few dozen apps you may notice a sluggish system. Yes, you can uninstall the Android apps that you no longer use but some of them leave remnants behind that aren’t deleted.

Below, you will find two methods for resetting an Android TV Box. The pin-hole method in the second method isn’t available for all boxes.

In the tutorial below, I am using the popular X96 Max Android TV Box.

How to Reset Android TV Box

Factory Reset through Settings

1 Click the Settings icon or menu button on the Android TV Box screen.

2 Click Storage & Reset.

3 Click Factory data reset.

4 Click Factory data reset again.

Your Android TV Box will now reset back to factory default settings. Please be patient while this process completes.

Your Android TV Box settings page may look different than the example above. If so, follow the instructions below.

6 Click Reset options.

7 Click Erase all data (factory reset). I had to use the mouse pointer on my remote to click this option.

8 Click Reset Phone.

Android TV Box Pin-hole Reset

If your Android TV Box doesn’t boot properly so you can access the settings tab, this method may work for you.

Look for a small hole on your Android TV Box that you could insert the end of a paper clip into. It may be located on the bottom of your box. Not all Android TV Boxes will have these available.

You may also find this pin hole located inside the AV port. This is where its located on the X96 Max.

1 Disconnect your Android TV Box power cord from the back of the device.

2 Press and hold the reset button by inserting a paper clip or toothpick into the pin-hole (don’t let go).

3 While pressing the reset button, reconnect the power cord to the Android TV Box.

4 Keep pressing the reset button for 10 to 15 seconds and then let go.

5 You should now see the Recovery Mode screen with the option to Wipe data/factory reset, press that option.

After you click the reset button you will be asked to confirm.

Once the process has completed, you will be back on the screen displayed above. Click “Reboot system now”. Be patient during the reboot.

If you are wondering how to reset other popular streaming devices, check out our other device reset tutorials.

After resetting your Android TV Box, your device will now be refreshed!

By Sigismondo Eisenhower 2019-11-28 20295 0

How to soft reset H96 Max TV Box?

Step 1: Start your Box as normal.

Step 2: From Home screen of your H96 Max TV Box go into Settings.

Step 3: Click on More Settings.

Step 4: Click on Backup and Reset and make sure Automatic restore option is Tick checked.

Step 5: Click on Factory Data Reset.

Step 6: Click on Reset Device.

Step 7: Once you will click on Reset Device you will get an popup screen “Do you want to erase everything”, Tick check the option and click OK.

Step 8: Now the Box will start erasing the data and will restart with fresh Factory Settings.

Step 9: Once you will be back to the Home Screen of your Box give it around 20-30 mins till it will restore the preinstalled Apps like Kodi and then you can reinstall Addons or other Applications on your Box.

How to hard reset H96 Max TV Box?

Before doing the hard reset, prepare a toothpick or something similar, just make sure it’s non-conductive. Also, if you remote isn’t working because the system crashed, prepare a USB keyboard. Here are some steps to guide you.

Step 1: First off, turn off your H96 Max TV Box and unplug it from the power source.

Step 2: Once you’ve done that, take the toothpick and place it inside the AV port. You can find the port on the back of the box. Gently press the toothpick down to feel a tiny button.

Step 3: Gently press down further until you feel the button depress.

Step 4: Keep holding the button down then connect your box and power it up. Don’t release the button yet.

Step 5: Keep the toothpick in place to hold the button down until the logo emerges. Then the logo will go off and when this happens, you can let go of the button.

Step 6: If your box goes into its start-up mode, you can proceed to the last step. If it doesn’t then it means another screen will appear. This will ask you how you’d like to boot the TV box.

Step 7: When a menu appears, find and select the “wipe data” or “factory reset” option. You can use your USB keyboard to navigate through the screen.

Step 8: Press the tab key on the keyboard and select “delete all user data.”

Step 9: Press the tab key again and wait for the process to finish.

Step 10: Once it’s finished, select “reboot device” and press the tab key.

Step 11: Allow a few minutes for the box to reboot. When the box has rebooted, install all of your apps again. You can also install Kodi along with all its add-ons.

How to reset Kodi on H96 Max Android TV Box?

Now that you know 2 different ways of resetting your H96 Max Android TV Box, let’s learn how to reset Kodi on your H96 Max TV box. Knowing this is handy especially when you run into problems with Kodi.

Step 1: First off, make sure you’ve exited Kodi before starting the reset procedure.

Step 2 :Go to the settings screen of the box and find the apps or applications button.

Step 3: Click on Kodi for a new screen with options.

Step 4: Click on the “Clear Data” button to start the process.

Step 5: When it’s done, close the screens, launch Kodi and start using it again.

Extensive Product Selection

● Over 300,000 products

● 20 different categories

● 15 local warehosues

● Multiple top brands

Convenient Payment

● Global payment options: Visa, MasterCard, American Express

● PayPal, Western Union and bank transfer are accepted

@Summerson
April 29, 2016, 11:23am EDT

There comes a time in every user’s life when they have to reset something back to its factory default. Perhaps the device is acting wonky and needs a fresh start, you’re getting rid of it, or you want a clean slate for some other reason. The good news is that it’s incredibly easy to factory reset your Android TV box, regardless of the manufacturer.

The first thing you’ll want to do is jump into the Settings menu by heading to the bottom of the home screen and selecting the cog icon.

From there, find and select the “Storage & rest” option.

This menu is simple, as there are only two choices: “Internal storage” and “Factory data reset.” You want the latter.

Depending on which box you’re using, there could be a few options here. For example, Nexus Player will just offer “Full reset” and “Cancel” options, where NVIDIA’s SHIELD also has a “Fast reset“ option. Select the one that makes the most sense for your situation—if you plan on getting rid of the box completely, always do a ”Full reset.“

Once you’ve selected the desired option, there will be one more screen confirming that you’re sure that’s what you want to do. Select “OK” (or whatever the confirmation for your particular box is) to get started.

Depending on the amount of storage your device has, this could take quite a while. My 500GB SHIELD notes that a factory reset could take up to two hours. The good news is you don’t have to sit around and watch it—the process is pretty much on autopilot anyway. You could go outside or something. I hear it’s nice out there.

Factory resetting any Android device is simple, but an oft-necessary part of being a responsible owner. Even if you plan on keeping the box, it’s always good to know how to start fresh if things seems to be going awry.

This week, we got the newly released Nokia TV, running Android TV 9.0 and after the first OTA update, it was stuck on the startup screen for hours. We did a force restart a couple of times but eventually had settle for hardware reset which solved the issue. So, here is how you fix Android TV stuck on boot.

Now, before we look for a solution, it’s important to understand the problem first. So, unlike the Android OS you get on smartphones, the AndroidTV OS doesn’t have A/B seamless updates. This causes the classic problem of unusable devices after an OTA update.

How to Fix Android TV stuck on Boot

The easiest fix is to reset your Android TV. That would take you back to the stable Android OS version. However, resetting the Android TV will delete all your local data, installed apps, channels, and wireless settings.

Now, you can either soft reset or hard reset your Android TV. But, since the Android OS is still not loaded, you wouldn’t be able to reach the Settings menu the conventional way. However, the Android TV makers mostly create their own settings menu on top of the Android TV. The only caveat is that this method is variable and entirely depends on the TV manufacturer.

For instance, we have the Nokia Android TV with us. On the startup screen, you have the custom Nokia TV menu which can be accessed by pressing the Home button on the Nokia TV remote. From the menu, select the More option.

You would now be redirected to the Android TV settings menu. Navigate to the bottom and click on “Device Preferences”.

Under the Device Preferences menu, navigate to the bottom and click on the Reset option.

On the confirmation page, select Erase everything.

Once done, the TV will take a minute or two to reset everything. On the next startup, log in to your Google account and set up other configurations.

Other Android TV

Some Android TV’s provide force reset using the hardware keys. For instance, the Sony Bravia TVs which run on Android provide you 3-4 button arrays on the back. To force reset, firstly you need to unplug the power chord. Next, press the power and volume minus button simultaneously while you plug in back the power chord. Hold on to the keys until the white LED turns green. Post that, the Sony Bravia screen will pop up. From here, you have to skip past the Google login, network, and channel settings. Now, factory data reset the device through the Android Settings.

If you have a Mi TV running Android TV, chances are you won’t be able to find the reset button. In order to hard reset the Mi TV, we would need to head over to the recovery mode. You would need the paired Mi Remote for this activity.

Plug OFF the power source to force shut down the TV. Once done, press the power and Back button at the same while you power ON the TV. Make sure you power ON the TV from the power source rather than using the power button on the TV.

Next, you will get the Mi splash screen followed by the Recovery mode. Release the remote buttons as soon as you reach recovery mode. In the recovery mode, you can choose to Reboot the device and see if the problem is fixed. In case a reboot doesn’t fix the problem, select “Wipe data/Factory reset” (see screenshot). Further, select Yes on the confirmation page.

After the reset, log in with your Google account and proceed with further configurations. Moreover, if you have a rooted Android TV, it is not recommended to select Wipe All as this could delete the root files as well.

For more issues or queries regarding Android TV, let me know in the comments below.

If things aren’t acting like they should on your Android TV (set-top box or software installed on your television), it may be time for a restart. Simply restarting the device can often solve problems you’re having. Here’s how to do it.

If you use electronics, you know that the common advice of “turning it off and on again” often works. This applies to Android TV devices as well. Sometimes a simple restart can make a world of difference. It’s very easy to do.

First, use the D-pad on your remote to select the “Gear” icon in the top-right corner of the television’s customizable Home screen.

The Settings menu will slide open. Some Android TV devices will have a “Quick Settings” section at the top that includes “Restart.” If you have the option, select it and you’re done.

If you don’t have the “Quick Settings” section, there are a few extra steps. First, scroll down and select “Device Preferences.”

Next, click “About.”

You’ll now see the “Restart” option. Select it to restart your Android TV.

The television will power off briefly and then you’ll see the bootup animations as it powers on again. That’s it!